Sony KV-HW212 CRT Television User Manual


 
29
Additional Information
Sony KV-HW212M95 Group H4 (GB, RU)_2-177-672-12 (1)
Possible causeSymptom
Solutions
Abnormal color
patches
TV cannot receive
stereo broadcast
sound.
or
Stereo broadcast
sound switches
on and off or is
distorted
.
“100
appears at
the top of the
screen and there is
no Teletext display.
Teletext display is
incomplete (snowy
picture or double
images).
The 1
(standby)
indicator on
your TV flashes
red several
times after
every three
seconds.
The TV screen
sometimes goes
blank for
slightly longer
than usual
during channel
change.
• The magnetic
disturbance from
external speakers or
other equipment, or the
direction of the earth’s
magnetic field may
affect the TV.
• The connection is loose
or the cable is damaged.
• The antenna setup is
inappropriate.
• The channel carries no
Teletext broadcast.
Connection is loose or
the cable is damaged.
The antenna setup is
inappropriate.
• Signal transmission
is too low.
• Your TV’s self-
diagnosis function
indicates the possible
problems.
• The “Signal Booster”
is functioning to
detect a weak signal.
This does not
indicate a
malfunction.
• Keep external speakers or other
equipment away from the TV. Do not
move the TV while the TV is turned on.
Press ! (main power) on the TV to turn
off the TV for about 15 minutes, then turn
it on again to demagnetize the TV.
• Check the antenna cable and connection
on the TV, VCR and at the wall.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Check the antenna cable and
connectionon the TV, VCR, and at the
wall.
• Check the antenna setup. Contact a Sony
dealer for advice.
• Display the “Channel Setup” menu and
set the “Signal Booster” to “Auto” from
“Manual Program”.
• Try using an external booster.
• Use the fine tuning (“Fine”) function.
• Count the number of times the 1
(standby) indicator flashes. Press !
(main power) to turn off your TV.
Contact your nearest Sony service center.
continue
Page
25
14
25
23
23
01GB08ADV-Rus.p65 20/9/04, 3:29 PM29
Black