Filter
Top Products
10
Using Your New TV
To change the color system setting
If the color is abnormal when receiving programs through the ˘ (antenna) terminal
or the … (video input) jack
1
Press SELECT until “COL
SYS” appears.
2
Press + or – to select the
appropriate color system
until the color is optimal.
Tip
• Normally, set “COL SYS” to “AUTO.”
Skipping program numbers
1
Press PROGR +/– or the number buttons until the unused or unwanted
program number appears.
2
Press SELECT until “MANUAL PROGRAM” appears.
3
Press + or –.
4
Press PIC MODE.
5
Press SELECT.
To preset the skipped program number again
Preset the channel automatically or manually.
Tip
• You can also use SELECT and . +/– on the TV to preset channels and
skip program numbers.
To use the fine tuning (FINE) function
The fine tuning (FINE) function may help reduce double images and lines moving
across the TV screen.
(1) Select the program number you want to adjust.
(2) Press SELECT until “MANUAL PROGRAM” appears on the screen.
(3) Press + or – on the remote control once.
(4) Press
to display “FINE” on the screen.
(5) Press + or – continuously until the picture quality is optimal.
(6) Press SELECT to return to the normal screen.
Presetting channels (continued)
SELECT
COL SYS : AUTO
AUTO PAL NTSC 3.58SECAM NTSC 4.43