Filter
Top Products
TV menu system
23
M
O
D
E
REC
OK
The following pages explain the TV set up menus and their operation. Although most of these menus can be accessed whilst
watching digital programmes, we recommend you switch to analogue mode to view all the menus. To check which mode you are in,
press the button on the remote control. If you are watching a digital programme, an Info display appears on screen providing brief
details for the current and next programme. If this happens, press the DIGITAL/ button on the remote control to switch to the
traditional analogue channels.
D
IG
IT
A
L
D
IG
IT
A
L
M
O
D
E
MENU
OK
R
EC
D
IG
IT
A
L
The programme index table is an easy way to search for a programme you wish to view.
1. Press the OK button to display the programme list on screen.
2. Press the V or v button to scroll through the list until the programme number you wish to view is
highlighted, then press the OK button to display that programme on screen.
Adjusting the picture
Option Adjustment/Effect
Picture Mode Press V or v button to select Live, Personal, Movie or Game mode. Live, Movie and
Game have had their picture levels preset to suit their intended functions, whilst
Personal mode allows you to set your own levels of brightness, sharpness and
colour.
Contrast
Brightness
Colour
Sharpness
Press B or b button to increase or decrease the levels to suit personal taste. You can
only adjust the Colour, Brightness and Sharpness if you have selected ‘Personal’ in
‘Picture Mode’ option.
Reset Resets picture to factory preset levels.
AI (artificial
intelligence)
Press V or v button to turn On or Off. When set to On, the TV will monitor the picture
and limit any sudden increases in brightness and contrast.
Noise
Detection
Press V or v button to switch On or Off. When set to On, this option can sometimes
reduce the noise level apparent on a weak signal.
DRC
Mode
Press V or v button to set the desired picture resolution. Set to ‘Off’ for basic picture
quality, ‘DRC50’ for improved resolution or ‘DRC100’ for optimum picture resolution.
Colour Tone Press V or v button to alter the tint of the colour to suit your taste. Choose from
Warm, Normal or Cool.
1. Press the MENU button to display the main menu, then press the b button to highlight ‘Picture Mode’.
2. Press the V or v button to highlight the option you require then press the b button to confirm.
The table below explains the function of each option and which buttons to press for adjustment. Once
adjustment has been finalised, press the OK button to store.
3. Press the MENU button when you wish to remove the menu from the screen.
Using the programme index table
NX 23-30.fm Page 23 Wednesday, September 5, 2001 9:34 AM