Filter
Top Products
10
6 Configure the base station NetAV settings to send video from the base station to a remote
computer in the Enable/Disable NetAV screen, as described below.
7 Configure the monitor to receive video from the base station in the NetAV Settings screen,
as described below.
Set this to Enable
Enter Port Number 5021
Settings > Base station > NetAV Settings > Enable/Disable NetAV
Enter the Host/Domain name
that you acquired on page 7,
step 6
1
Enter Port Number 5021
Settings > Monitor > NetAV Settings > NetAV Connection
1
If you have a fixed IP address, enter it at this step.
LFX1.fm Page 10 Friday, February 4, 2005 7:04 PM