Filter
Top Products
4
Checking the accessories
AC power cord (1)
Remote control (1)
*1
Size AAA batteries (2)
Table-Top Stand (1)
*2
(except XBR-60LX900)
Fixing screws for Table-Top Stand
(M5 × 16) (4) (except XBR-60LX900)
Assembling screws for Table-Top Stand
(M5 × 16) (4)
(XBR-40LX900 only)
Bottom cover (1)
*3
Stand rear cover (1)
*4
Black spacers (4)
*5
(XBR-52/46/40LX900 only)
Silver spacers (4)
*5
(XBR-60LX900 only)
Screws (M6 × 20) (4)
*5
(XBR-60LX900 only)
3D Glasses (battery included) (2)
Pouch for 3D Glasses (2)
*1 Please refer to the model name printed on the
remote control.
*2 XBR-40LX900 requires assembling.
Refer to other leaflet to assemble the Table-Top
Stand.
*3 For XBR-60LX900, the bottom cover is factory-
attached to the TV.
*4 For XBR-60LX900, the stand rear cover is
factory-attached to the Table-Top Stand.
*5 These screws and spacers are required when
installing an optional Wall-Mount Bracket. You
must use these screws instead of the ones
provided with the bracket for safety reasons. Be
sure to keep them in a safe place until you are
ready to use the Wall-Mount Bracket. See page
23 for the recommended Wall-Mount Bracket for
your TV.
Inserting batteries into the
remote control
1 Remove the protection sheet.
2 Push and slide the cover upward.
Guidelines for Remote Control
• Point your remote control directly at the IR
sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the IR
sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the fluorescent
lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.