22
US
D:\Sony TV Job\JC150467_4562216131_4K-XF_UC2_RG (US,CF)_revision2\Full set
data\4562216131\4562216131\01US-KDL1XBR75X850CUC2\030ADD_US.fm
masterpage: Left
XBR-75X850C / 65X890C / 65X850C / 55X890C / 55X850C / 49X830C / 43X830C
4-562-216-13(1)
To detach the Table-Top Stand from the TV, remove the screws .
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the
TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV
with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
Changing the cable management (XBR-55X890C, XBR-55X850C, XBR-49/
43X830C)
Detaching the Table-Top Stand from the TV