Filter
Top Products
3 of 4
H
OME
L
OGIC
C
ONFIGURATION
D
ETAILS
The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.
o “<Select>” Select the appropriate item from the list (or drop-down) in the Configurator.
o “<User Defined>”, etc. Type in the desired name for the item.
Devices Variable Name Setting Comments
Communication Devices Name
<User Defined> (Default:
Sony DVD
)
Type Serial Port
Communication Type Standard Connection
Location
<User Defined> (Not Required)
COM Port
<Select>
DVD Players Name
<User Defined> (Default:
Sony DVP-CX777ES
)
Device Type Sony DVP-CX777ES
Location
<User Defined> (Not Required)
COM Device
<Select> (Default:
Sony DVD
)
Other Audio Devices/Interfaces Name
<User Defined> (Default:
New Interface
)
See Note 1
Template DVD (Carrousel + Select)
Default Device Sony DVP-CX777ES
<Audio Zone Controllers> Add an Audio Zone Controller: refer to the Integration Note for your particular receiver or zone controller. (See Note 2)
Notes:
1. If the DVD player is going to be connected to an Escient DVDM-100 then refer to the integration note for the Escient.
2. You must add an Audio Zone Controller to get a tab in the Viewer interface.
For compatible receivers and zone controllers, refer to the Integration Note for the particular system.
For a single zone where the DVD player is connected to a basic amp, refer to the
Single Zone Audio
Integration Note.