Filter
Top Products
15
Digital tuner
Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is
not available in you area, the following service is not available, either.
Band selection
Press the MOD button on the panel or MODE button on the RC to select the TUNER mode.
Press P/N/BAND button on the RC or BD button on the panel once or more to select: FM1, FM2, FM3, AM1,
AM2. Display will show the wave band, frequency and preset station number if already stored.
Manual/automatic tuning
- Manual tuning: Press briefly the UP/DN button on the panel or / button on the RC to select a
station upward or downward step-by-step.
- Automatic tuning: Press and hold for 2 seconds the UP/DN button on the panel or / button on the
RC, the automatic search will start. It will play when finds the station.
Auto store function
You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically.
To store a station:
- Select a band (if needed)
- Select a station by / on the RC or UP/DN on the panel.
- Hold a Preset button (1-6), which you want to store the station for at least for 2 seconds.
To recall a station:
- Select a band (if needed)
- Press a Preset button (1-6) briefly to recall the stored station.
Preset scan function
Press the APS button to scan all preset stations in the memory of the current band and stay on each
memory stations for about 5 seconds. To stop preset scan, press this button again.
Auto memory store function
Press the APS button on the panel and hold for 2 seconds to enter auto store mode. The radio will
automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop
auto store, press this button again.
Mono/Stereo selection
Press the ANGLE/ST button on the RC to select the sound channel: MONO or STEREO.