Filter
Top Products
30
Switching Source Signals
Press SOURCE to select the in
coming source signal..
The current source setting
(TV/CATV, AV1, AV2 or PC )
appears on the upper left corner
of the screen.
Note
The TV supports S-Video input in
addition to normal video and
audio signals. The TV detects the signal type automatically and gives pri-
ority to S-Video when two signals are detected at the same time.
Adjusting the Volume
Press VOL UP button to
increase the volume. Press
VOL DOWN button to
decrease the volume. The
volume level is displayed on
the TV.
40
Source
Volume level
48
Volume up
Volume down