StarTech.com SV1641HDIE Universal Remote User Manual


 
Instruction
Manual
14
RADIUS:
The RADIUS server requires the IP address, the
UDP port number (1812 - default or 1645) and
the shared secret. The shared secret is used to
encrypt communications and corresponds to a
shared password for the RADIUS server and the
client machine. Two additional servers may be
defined for backup purposes. Each server will be
tried in order, using the indicated number of
retries and timeout period, which are
configurable on the same page.
Remember to enable RADIUS after configuring it. While RADIUS authentication is
enabled, the locally defined accounts on the Server Remote Control unit will not be used,
except for the SSH login. However, if a user name of the form “name.local” is given at the
RADIUS prompt, the system will use “name”; check the password locally, and skip
RADIUS authentication. Delete all local accounts to avoid this behavior. When
connecting via VNC, a login screen is generated that asks for a RADIUS username and
password.
Modem:
Enable this to allow the modem to answer the
phone and start a PPP connection.
Enable modem connections (PPP) via serial
port/modem.
Serial Ports:
The
Serial Ports
menu allows you to manage
and connect to devices connected to the unit
using the R-Port on the SVxx41HDIE.
Time / Date:
Date and time are stored without consideration for time zone. If you are
controlling multiple sites in different time zones, we recommend you use
UTC (Universal Coordinated Time, also sometimes called GMT or Zulu)
for all machines.
If the computer you are using to view this page knows the correct time,
just press the button to set the time and date to the same time as your
browser.