Filter
Top Products
16
No picture or sound -Tuned to digital teletext channel
-Bad reception
-Channel has changed Transponder
or Audio/Video data values
-Reduce to another channel
-Check Signal
-Check according to satellite service
or at www.strong.tv
The remote control unit
(RCU) will not operate
your receiver
- Power supply unplugged
- RCU not aimed correctly
- IR-eye obstructed, not well
connected or defective
-RCU batteries exhausted
- Connect Power supply
- Aim RCU at IR-eye
- Check for obstructions, connection
of IR-Eye or try another IR-Eye
-Replace the batteries
Incorrect information in
the EPG
Loading data needs time Try to reopen the EPG or change to
another channel and back, have a
little patience with it
Receiver doesn’t respond
(hung up)
Large amount of data Disconnect the Power supply and
wait a few seconds before connecting
Power supply again.
Forgotten channel lock code Re-install channels to cancel channel lock
Forgotten menu lock code Contact help line
A.2. SPECIFICATIONS
Demodulator
Modulation: QPSK
Input Symbol Rate: 2 – 45 MS/s
Video Decoder
Profile level: MPEG-2 Main profile @ Main level
Input Rate: Max. 60 Mbit/s
Video Resolution: 720 x 576 pixels (PAL), 720 x 480 (NTSC)
Video Format: PAL / NTSC
Aspect Ratio: 4:3, 4:3 Letter Box, 16:9