Filter
Top Products
Figure 3 Pole Mount Con guration for 23” Series
Hardware included with Pole Mount SB-DP2332X:
1 Pole with Flange
4 1/4” Concrete Anchors with 1/4” Nuts and Washers
Figure 2
Figure 2
Use the Flange as a template to mark the locations of holes.
Drill 1/4” diameter x 1” deep holes using a concrete drill.
Use the 4 1/4” Concrete Anchors to mount the Pole.
Shim Pole level and plumb.
Secure using the 1/4” Nuts and Washers .
Orient the Pole so that the Cable Entry Holes at the top of
the Pole face towards the back of the TV.
Attach Wall Plate to Pole
(Figures 3 and 4):
Hardware included with Wall Mount SB-WM2332X:
2 3-1/2” Bolts 1 23” Series Wall Plate
2 3/8” Washers or
2 3/8” Nuts 1 32” Series Wall Plate
1 Wall Mount Installation Instructions
There are 3 Positioning Holes on the Pole that will
accomodate mounting confi gurations for either the 23”
Series TV or the 32” Series TV.
The 23” Series Wall Bracket utilizes the Top and Bottom
Positioning Hole (See Figure 3).
The 32” Series Wall Bracket utilizes the Top and Middle
Positioning Hole (see Figure 4).
Use the 3-1/2” Bolts and 3/8” Nuts and Washers
provided to attach the Wall Plate to the Pole. Secure
tightly.
(Note: The Wall Mount is supplied with 2-3/4” Bolts that are
to be used for attaching the Wall Mount to a wall. Do not use
these Bolts for the Pole installation.)
3
Install Pole (Figure 2):
4
5
Attach Wall Mount to Wall Plate *
* For complete instructions of how to attach the
Wall Mount to the Wall Plate, and TV to the Wall
Mount, please refer to the Wall Mount Installation
Instructions packaged with the Wall Mount.
Please note that SunBriteTV Wall Mounts can
be used for wall or pole installations. These
instructions are for Pole installations only. For
complete instructions on how to mount the TV on
a wall, please refer to the Wall Mount Installation
Instructions.
Attach TV to Wall Mount *
6
SunBriteTV Deck/Planter Pole and Wall Mount Installation Instructions (Continued)
Part No. SB-DP2332X
To Accommodate SunBriteTV Models 23” and 32” Series
Figure 4 Pole Mount Con guration for 23” Series