Filter
Top Products
SRC-3820 User’s Manual
8
Entering the Setup Menu
Press and at the same time over three seconds to
enter the setup menu.
Figure 3: Entering the Setup Menu
When the power low icon appears or the system is
located at the QUICK CH mode, you are not allowed
to enter the setup menu.
Navigating the Setup Menu
While in the setup mode, tap and to select
desired option and tap
to confirm or press to
exit.
Figure 4: Navigating Menu
The standby time is set two minutes when the
system is in the state of setup mode. Once time
ends up, the system will compel you to exit the
setup mode and return to the operation mode.