Filter
Top Products
2-8
SC823 Chassis User’s Guide
2. Pull the drive tray door upward and then pull the drive tray out from the chas-
sis..
1
2a
SC
D1. Accessing the SCSI (or SATA) Drive Tray and Installing a
Hard Disk(*For the SC823S/823T series)
To install the SCA(SATA) drive into the chassis, you need to first remove the
SCA(SATA) drive tray from the chassis.
Procedures
1. Press the release tab located on the drive tray door to release the drive tray
from its locking position as shown below.
3. Remove the screws to loosen the drive tray. Once loosened, pull it out from its
housing. Then, mount a hard drive in the drive tray and secure it with screws as
shown below.
SCA (SATA) Drives (*SC823S/823T Series)
3a
3b
3c
3d
2b
D
3d