SVAT Electronics VR100 DVR User Manual


 
www.svat.com
PLAYBACK
Press the PLAY button, then the unit plays the last recording back.
You can select a recording number using the FF() or REW() button before pressing the PLAY
button. Adjust the volume switch to control the sound level.
Use earphone if ther is a lot of noise.
Press the PLAY button again to stop playback.
Scanning all the recordings
Press the PLAY button for more than 2 seconds, "SCAN" will be displayed and the first 5 seconds of
each message will be played back from the current recording number.
When you find a desired message, press PLAY button. The selected message at that moment will
be played back.
To stop playback, press the PLAY button again.
Pausing during the playback
To stop the playback temporarily, press the MODE/PAUSE button during the playback.
The maximum pause time is 10 minutes; if you want to continue, press the MODE/PAUSE button.
Fast forward and Rewind during the playback
During playback time, FF() and REW() button will either fast forward or fast rewind the recorded
message. Pressing the FF() or REW() button once will fast forward or fast rewind the recorded
message approximately 20 seconds.
Repeat playback
During playback, if you press down PLAY button for 2 seconds; a certain recorded message will be
played 10 times. To stop repeat playback and return to playback mode, Press PLAY button, then play-
back will be continued.
Searching for Message Number
When you hold the FF()/REW() buttons for a long time in STOP MODE, the message number will
be increased/ decreased fast.
When you hold the FF()/REW() buttons for a short time in STOP MODE, the message number will
be increased/ decreased one by one
CELL ADAPTER
Connect the “L” shaped connection to your head phone output on your
cell phone. While the Voice Recorder is turned off, connect the straight
connection to the MIC input on the voice recorder. You can now record
from your cell phone.