Filter
Top Products
–
24
–
EN
You may determine the order in which tracks will play.
1 In stop mode, press [MODE].
•
The “PROGRAM” screen will appear.
2 Press [▲ ] or [▼] to select a track, then press
[ENTER].
•
Press [CLEAR] to erase the most recently
entered track.
•
If the entire Program cannot be displayed at
once on a screen, “G” appears to go to the next
page and “H” appears to go back to the previ-
ous page.
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Press [PLAY O] to play the programmed tracks.
•
While the program is being played back,
pressing [STOP C] works as follows.
•
Press [STOP C] once and then [PLAY O]
again, playback will restart from the point
where [STOP C] was pressed. (Program con-
tinued)
• Press [STOP C] twice and then [PLAY O]
again, playback will restart from the track in
the usual way. (Program canceled)
•
Up to 99 tracks can be entered.
•
To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
•
If you like to repeat the current track in the
program, press [REPEAT] several times until
“ TRACK” appears during playback. If you
like to repeat the entire program press
[REPEAT] several times until “ ALL”
appears during playback.
This function shuffles the playing order of tracks
instead of playback in the sequence.
1 In stop mode, press [MODE] twice.
•
“RANDOM” screen appears.
2 Press [PLAY O] to start random playback.
•
If you like to repeat the current track in the ran-
dom selection, press [REPEAT] several times
until “ TRACK” appears during playback. If
you like to repeat the entire random selection
press [REPEAT] several times until “ ALL”
appears during playback.
PROGRAM
MODE
ENTER
TOTAL
1/4 2/3
1 3:30
5 5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
1:03:30
PLAY
NOTE
RANDOM PLAYBACK
twice
MODE
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
RANDOM
PLAY
NOTE
L3254CE(P23-35).QX3 06.2.9 0:34 PM Page 24