Filter
Top Products
–
22
–
EN
0C28
TRACK SEARCH
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
Using the number buttons on the remote control
1 Press the number buttons to enter the
desired track number.
¡
Playback will start at the selected track.
¡For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6.
Using SEARCH MODE
1 Press SEARCH MODE.
¡
The Track search display appears.
2 Within 30 seconds, select a desired track
number using the number buttons.
¡
For single digits press 0 first.
¡Playback will start at the selected track.
Using PREV/NEXT (
H
/
G
)
During playback, press NEXT G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press PREV H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡If NEXT G is pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
NOTE
¡PREV/NEXT (H/G) are not available when
playback is stopped.
MP3CD
TITLE / CHAPTER SEARCH
1 Press SEARCH MODE once for the Chapter
search and twice for the Title search during
playback.
2 Enter the desired chapter/title number using
the number buttons.
¡
Playback will start at the selected chapter or track.
¡Press CLEAR to erase the incorrect input.
¡For single digits press 0 first.
DVD-V
_/2
TIME SEARCH
1 During playback press SEARCH MODE
three times (CD: twice) to display the Time
Search on the TV screen.
2 Within 30 seconds, enter a desired disc
time using the number buttons.
¡
Playback will start at the specified time.
¡Press CLEAR to erase the incorrect input.
¡When there is no need to enter a number, “0”
appears automatically. For example, “ 0 : 0
-
:
- -
”
appears in the Time Search display if the total time
of the disc is less than 10 minutes.
CD
DVD-V
SEARCH FUNCTION
MARKER SETUP SCREEN
Use markers to memorise your favorite places on a
disc.
1 Press SEARCH MODE four times (CD: three
times) during playback.
¡
The display screen and Markers will appear on the
TV screen.
2 Press Arrow (s/B) to select 1, 2, 3, 4, 5, 6,
7, 8, 9, or 10 and ensure that “
- - - -
:
- -
:
- -
”
appears in the display.
3 When you reach the desired point press
ENTER.
¡
The title or track and elapsed playing time will
appear on the TV screen.
4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback and Arrow (s / B) to choose the
desired marker then press ENTER.
NOTES
¡Opening the disc tray or turning off the power or
selecting AC at step 2 and pressing ENTER will
erase all Markers.
¡To clear a marker using Arrow (s/B
)
, position the
cursor on to the marker number to be cleared and
press CLEAR.
¡You can mark up to 10 points.
5 Press SEARCH MODE or RETURN to exit.
CD
DVD-V