Symphonic SC724DF TV DVD Combo User Manual


 
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
USER’S SET UP
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
21
EN
AUTO RETURN
TV/VCRTV/VCR
This function allows you to automatically
search the beginning of the recorded
program(s) after timer recording finishes.
1 Press [SET-UP].
Use
[
KK
/
LL
] to point to
"USER’S SET UP",
then press
[ENTER].
2 Use [
KK
/
LL
] to point to
"AUTO RETURN", then press
[ENTER] to select "ON".
3 When all the timer recordings are completed, the
unit will rewind to the beginning of the recorded
program(s) and then turn itself off.
NOTE:
If you turn off the unit while rewinding the tape, the
AUTO RETURN will stop.
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and press [ENTER] to select
"OFF".
• Even if any power failure occurs, the unit will
retain its memory for this feature.
RECORDING
TV/VCR SECTION
AUX
SP
COPYING A VIDEO CASSETTE
(from another source)
You can make copies of video tapes for
your enjoyment.
You CANNOT copy a DVD to a videotape.
Connect the unit and a source (for playing) device
as shown the following diagram.
WARNING: Unauthorized recordings of copyrighted
video tapes may be an infringement of copyright
laws.
1 Insert a pre-recorded video cassette into the
source device (VCR, camcorder, etc.).
2 Insert a video cassette to record into this unit’s
cassette compartment.
3 Press [SPEED] to select the
desired recording speed
(SP/SLP).
4 Press [SELECT] until "AUX"
appears on the screen.
5 Press [REC/OTR] on the unit.
6 Begin playback of the tape
in the source device.
NOTE:
•For best results during copying, use the front panel con-
trols whenever possible. The remote control might affect
the operation of the source device.
7 To stop copying, press [STOP/EJECT C A] on
the unit, then stop the playback on the source
device.
HEADPHONE
VIDEO AUDIO RL
VIDEO
IN
OUT
AUDIO
IN
OUT
L
R
[Ex: Jacks of
source device]
Audio/Video
cables
(not supplied)
[This unit]
TV/VCRTV/VCR
AUTO REWIND-EJECT
TV/VCRTV/VCR
When the end of a tape is reached
during recording, playback, or fast-
forward, the tape will automatically rewind to the
beginning. After rewinding finishes, the unit will
eject the tape and turn itself off.
This function is operative when REPEAT PLAY is
set to "OFF".
The tape will not auto-rewind during timer record-
ing or One Touch Recording (OTR).
T2203UD_EN.QX4 06.4.11 7:19 PM Page 21