You can check the MP3 files during playback.
Press DISPLAY.
• The name of the file currently in play will be displayed.
Press DISPLAY again to show the track number,
the elapsed time, the repeat status, and the play-
back status at the top of the screen.
• will be displayed when the repeat play has been
selected.
T - indicates Track repeat
G- indicates Group (folder) repeat
A - indicates Disc repeat
Press DISPLAY again to exit.
3
2
1
MP3
On-Screen Information
When a CD with MP3 files is inserted in the DVD player, the
MP3 menu will appear on the TV screen.
In stop mode, press K or L to select the desired
group or track.
• If a group is selected, press
B
or ENTER to go on to
the track selection screen. Press K or L to choose a
track, then press PLAY or
ENTER.
• If a track is selected,
press PLAY or ENTER to
start playing tracks.
Starting from the one
you’ve just chosen the
subsequent tracks will be
played.
• Choose FIRST PLAY to
start playback from the beginning of the listed tracks.
• Press
TITLE to return to the first item.
Press STOP to stop playback.
NOTES:
• Folders are known as Groups; files are known as Tracks.
• MP3 files are accompanied by icon.
• Maximum of 255 folders can be recognized.
• Maximum of 256 files can be recognized.
• Up to 8 hierarchies can be created.
This player recommends the use of files recorded at the below spec-
ifications
:
• Sampling frequency: 44.1kHz or 48kHz
• Constant bit rate: 112kbps ~ 320kbps.
3
2
1
MP3
MP3 Playback
This shuffles the playing order of tracks instead of playback
in the sequence.
In stop mode, press
MODE twice.
•
RANDOM screen appears
.
Press PLAY to start ran-
dom playback.
NOTES:
• If you like to repeat the cur-
rent track in the random
selection, press REPEAT repeatedly until TRACK
appears during playback. If you like to repeat the entire ran-
dom selection press REPEAT repeatedly until ALL
appears during playback.
2
1
CD
You may determine the order in which tracks will play.
In stop mode press MODE.
• The PROGRAM screen
will appear.
Press ▲ or ▼ to select a
track, then press
ENTER.
• Press CLEAR to erase
the The most recently
entered program.
Press PLAY to play the
programmed tracks.
NOTES:
•
While the program is being played back, the STOP works as follows.
•
Press STOP once and then PLAY again, playback will restart
from the point where
STOP was pressed. (Program continued)
•
Press STOP twice and then PLAY again, playback will restart
from the track in the usual way. (Program cleared)
• Up to 99 programs can be entered.
• If you like to repeat the current track in the program, press
REPEAT repeatedly until TRACK appears during play-
back. If you like to repeat the entire program press
REPEAT repeatedly until ALL appears during playback.
3
2
1
CD
Program
–
11
–
EN
PLAYING A DISC
REPEAT A-B
Press REPEAT A-B at your chosen starting point.
• A- appears briefly on the TV screen.
Press REPEAT A-B again at your chosen end point.
• A-B appears briefly on the TV screen, and the repeat
sequence begins.
To exit the sequence, press REPEAT A-B.
NOTES:
• The repeat A-B section can only be set within the current
title (for DVDs), or current track (for audio CDs).
• Repeat A-B is not available with some scenes in DVD.
•
To cancel the A point which was set, press CLEAR.
• Repeat A-B playback does not function during title, chap-
ter, track or all repeat playback.
3
2
1
CDDVD-V
NOTES:
•
The REPEAT setting will be cleared when moving to other track
.
•
Repeat playback does not function during repeat A-B playback.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
CD
REPEAT TRACK
TOTAL
PLAY
CD [AUDIO] TOTAL 0:45:55
RANDOM PROGRAM
no indication
RANDOM
TRACK ALL OFF
(current track repeat) (entire disc repeat)
(repeat off)
Random Playback
MP3
TRACK GROUP OFF
(current track
repeat)
(current group
repeat)
(repeat off)
ALL
(entire disc
repeat)
E5760UD.QX3 03.4.7 2:28 PM Page 11