Symphonic VR-701 VCR User Manual


 
SPECIFICATIONS
Television system : NTSC, TV standard
Video heads : Rotary four-head
Tape cassette : video cassette
Tape speed
Recording : SP, SLP
Playback : SP, LP, SLP
Tuner channel
VHF : #2~#13
UHF : #14~#69
Cable channel : 5A, A-5 ~ A-1, A ~ W+84
RF converter : Built-in VHF converter
Converter output : VHF Channel 3 or 4.
Timer indication : AM/PM 12-hour system
Operating temperature : 5
o
C~40
o
C (41
o
F~104
o
F)
Terminals
Antenna input : F type connector x 1
Antenna output : F type connector x 1
Video input/output : RCA connector x 3
Audio input/output : RCA connector x 6
Video output level : 1Vp-p
Video output impedance : 75
Audio output level : -6dBv (1KHz)
Video input level : 0.5~2.0Vp-p
Audio input level : -10dBv
Power requirement : 120V, 60Hz
Power consumption : 14 Watts
Dimensions : W 14-1/4" (360mm)
H 3-5/8" (92mm)
D 8-1/2" (215.5mm)
Weight : 5.3 lbs. (2.4 Kg.) (approx.)
Designs and specifications are subject to change
without notice and without legal obligation.
If there is a discrepancy between languages, the de-
fault language will be English.
MAINTENANCE
SERVICING
Should your VCR become inoperative, do not try to cor-
rect the problem by yourself. There are no user-service-
able parts inside. Turn off, unplug the power plug, and
please call our help line at 1-800-242-7158, to locate an
Authorized Service Center.
CABINET CLEANING
Wipe the front panel and other exterior surfaces of
the VCR with a soft cloth immersed in lukewarm
water and wrung dry.
Never use a solvent or alcohol. Do not spray insecti-
cide liquid near the VCR. Such chemicals may cause
damage and discoloration to the exposed surfaces.
AUTO HEAD CLEANING
Automatically cleans video heads as you insert or re-
move a cassette, so you can see a clear picture.
Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accu-
mulated on the video heads after long periods of use,
or the usage of rental or worn tapes can cause this
problem.
If a streaky or snowy picture appears during play-
back, the video heads in your VCR may need to be
cleaned.
1. Please visit your local Audio/Video store and pur-
chase a good quality VHS Video Head Cleaner.
2. If a Video Head Cleaner does not solve the problem,
please call our help line at 1-800-242-7158, to locate
an Authorized Service Center.
NOTES:
Remember to read the instructions included with the
video head cleaner before use.
Clean video heads only when problems occur.
1C31
H7933
- 13 - EN