Filter
Top Products
19
WATCHING TV
EN
STILL MODE
You can freeze the image shown on the screen.
1 Pause the image.
• When you press
[STILL], the image shown on
the screen is paused.
• The audio is not paused and keeps on reading
out.
• If the digital signal is gone or protected, the
image will remain paused and the audio will be
muted.
• The Still function will be released after 5
minutes.
2
Canceling Still function.
• The Still function will be canceled by pressing
any button while Still function is working.
SWITCHING AUDIO
This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
1 Switch the audio.
• Every time you press
[AUDIO], the audio will
be switched as below.
When the broadcasting has all audio...
SAP / STEREO SAP / STEREO
SAP / MONO
6
SAP / STEREO
TV
AUDIO
STILL
SETUP
SCREEN
MODE
7 8 9
-
0
AUDIO
NOTE:
• Press any key except [POWER] to cancel still mode.
Still
AUDIO
STILL
SETUP
SCREEN
MODE
1 2 3
4 5 6
7 8 9
-
0
STILL
When the broadcasting has SAP and stereo
audio...
When the broadcasting has SAP and monaural
audio...
When the broadcasting is having only monaural
audio...
(cannot be switched.)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
1
Switch the audio language.
• When you press
[AUDIO], the currently selected
language and the number of received languages
will be displayed on the screen.
• Every time you press
[AUDIO], the language
will be switched.
•
Languages you can switch differ depending
on the receiving broadcast.
• The information display will automatically dis-
appear in one minute.
NOTE:
• The [AUDIO] feature does not affect external source sound.
English 1/3 Spanish 2/3
Other 3/3
"Other" is indicated
when the language is not English,
Spanish or French.
*For international stations audio
language will still be displayed as
English.
6-1
English 1/3
DTV
MONO
SAP / MONO SAP / MONO
SAP / STEREO SAP / STEREO