Tascam CD-160 Flat Panel Television User Manual


 
10
Remote Control Unit
The provided Remote Control Unit allows the
unit to be operated from a distance.
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit.
Even if the remote control unit is operated
within the effective range, remote control
operation may be impossible if there are
any obstacles between the player and the
remote control.
If the remote control unit is operated near
other appliances which generate infrared
rays, or if other remote control devices
using infrared rays are used near the
player, the player may operate
incorrectly. In the reverse way, the other
appliances may operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two "AA" (R6, SUM-3) dry
batteries.
Make sure that the batteries are
inserted with their positive and
negative poles positioned correctly.
3. Close the cover until it clicks.
Battery Replacement
If you notice that the distance between the
remote control unit and the player for
correct operation becomes shorter, it
indicates that the batteries are exhausted.
In this case replace the batteries with new
ones.
Precautions Concerning Batteries
Be sure to insert the batteries with
correct positive and negative
polarities.
Use batteries of the same type. Never
use different types of batteries together.
Rechargeable and non-rechargeable
batteries can be used. Refer to the
precautions on their labels.
When the remote control unit is not to
be used for a long time (more than a
month), remove the batteries from the
remote control unit to prevent them
from leaking. If they leak, wipe away the
liquid inside the battery compartment
and replace the batteries with new
ones.
Do not heat or disassemble batteries
and never dispose of old batteries by
throwing them in a fire.
Remote-Controlled Operation
2 Remaining time display
(EACH REMAIN)
Press the TIME button to light EACH
REMAIN up.
This provides an easy check of the total
remaining time of the track being
played.
3 Total remaining time display
(TOTAL REMAIN)
Press the TIME button to light TOTAL
REMAIN up.
This provides an easy check of the total
remaining time required to finish the
disc.
Displayed after the TIME button is
pressed three times. The time displayed
is the elapsed playback time.
The TOTAL REMAIN time may not
appear in the display during program
playback or random playback, and the
time counter will not be displayed while
in the stop mode during program
playback, even when the TIME button is
pressed.