Filter
Top Products
11
OPERATION
OPERATING INSTRUCTIONS
1. Place the monitor where you plan to use it.
2. This monitor can be operated between 100V to 240V .
AC AC
3. Plug the power cord into AC RECEPTACLE on the wall.
4. Link the A/V terminal from your devices into the audio / video in (RC A/ BNC)
Connectors of the monitor.
5. Turn your device system power switch ON. then turn the monitor power switch ON.
The power indicator will be ON at this moment.
6. Allow about 30 seconds for the display tube to warm up, then the image of the
Display should appear on the screen,and power -ON LED indicator luminant.
7. The monitor will detect the frequency of the input signal automatically, and the
Display image is able to be adjusted through the function VR on front control panel.