Filter
Top Products
VGA Menu Setup
The VGA mode supported up to 1366X768@75Hz(for 26"), you can use this unit as a
multimedia PC monitor. When this unit works in VGA mode, the following setup can
be done.
Press [SETUP] button to enter main section. Press [ ] button to select sections and then
press [ ] button or [OK] button to enter. If all is complete, please press [SETUP] button twice to
exit and your setup data will be saved automatically.
Select VGA SETTING item to adjust such
parameters as Contrast, Brightness,
H-offset, V-offset, Frequency, Phase,
Auto Adjust.
VGA SETTING
NOTE
When your PC goes into standby mode, the screen will show
as right side. This unit will go into sleep mode if no signal
input for 5 minutes. In this mode, the indicator will remain
green, and the screen will turn off. You can wake it up by
waking up your PC.
VGA
NO SIGNAL
1: 50
VGASETTING
Brightness
V-Offset
H-Offset
Select
Return
SETUP
Enter
Contrast
OK
Frequency
Phase
AutoAdjust
75
50
50
50
0
60
SOUND
Sound Mode item can be changed between
Music, Film, News, User.
Select SOUND item to adjust sound parameters.
You may adjust Sound Mode, Treble, Bass,
Balance, Auto Volume and Surround Sound.
Auto Volume item enables you to adjust Off or On
for controlling volume automatically.
Surround Sound item enables you to select Off or
On for surround sound.
SOUND
Select Return
SETUP
Treble 75
Bass
50
Balance
50
AutoVolume
SurroundSound
User
SoundMode
Adjust
Off
Off
26" HD Ready LCD/DVD TV with USB Record User Guide 31