TechniSat HD-VISION 32 PVR Flat Panel Television User Manual


 
9.3.4 Manual search for DVB-C programmes
Search run method
Use this line to select between channel search, and frequency search.
> For this purpose, select the search run method line with the up/down arrow keys.
> Use the right/left arrow keys to select the required search run method.
Channel
only during channel search
> Use the up/down arrow keys to select the Channel line.
> Use the right/left arrow keys or the numeric keyboard to set the required chan-
nel.
Channel type
only during channel search
> Use the up/down arrow keys to select the Channel type line.
> Use the right/left arrow keys to set the channel type (Standard channel C-Channel
or special channel, S-channel).
Frequency
only during frequency search
> Use the up/down arrow keys to select the Frequency line.
> Use the right/left arrow keys or the numeric keyboard to set the required fre-
quency.
Symbol rate
> Use the up/down arrow keys to select the Symbol rate line.
> Use the numeric keyboard, to enter the symbol rate.
Modulation
> Use the up/down arrow keys to select the Modulation line.
> Use the right/left arrow keys to enter the channel modulation.
> Then continue with section 9.3.6.
9.3.5 Manual search for DVB-T programmes
Channel
> Use the up/down arrow keys to select the Channel line.
> Use the right/left arrow keys to set the required channel.
9.3.6 Starting the manual DVB-S/DVB-C/DVB-T search
> In order to start the search run, press the green Search control key.
Pay attention to the screen inserts.
9.3.7 After the search run
After the search run a query is displayed, asking you whether the found programmes should be
added as sorted, unsorted or not at all to the favourites list.
> Use the left/right arrow keys to select the input Sorted, in order to take over the
sorted programmes into the favourites list and acknowledge with OK. The found pro-
grammes are sorted into the favourites list according to a pre-programmed list.
58
37779_HDvisionPVR_EN_.QXP 16.2.2007 9:21 Str. 58