Filter
Top Products
7
OPERATING THE TELEVISION
Connect your TV aerial to the aerial input socket located on the back of the TV.
Push the Main Power Switch, Power Indicator will be illuminated. After a few seconds the TV
screen will light up and will show interference on the screen. The TV will require tuning into the
available TV stations in your area.
Pre-setting the TV stations into the Memory
(Note: Preset tuning can only be carried out in TV Mode)
Press MENU three times on the remote handset, the TV
screen will show TUNE mode as FIG.1
AUTO SEARCH
1. Press the Navigation button to select the AUTO SEARCH
mode as shown in FIG. 2
2. Press the Navigation button to start the automatic
scanning process starting from VHF to UHF
and the TV stations will automatic store into the memory as
shown in FIG. 3
• When scanning is completed, the set will tune to lowest
programme and show lowest programme number on the
screen.
• To stop auto search function to press MENU button.
• To exit the TUNE mode, press the MENU button.
MANUAL SEARCH
1. Press the Navigation / button to select the PROGRAMME.
Then press the Navigation / button to select the desired
Programme number.
2. Press the Navigation / button to select the MANUAL
SEARCH mode and press the Navigation / button
to start the search up the band. The TV screen will show
the tuning and when the first station received is located,
the tuning will stop and be stored automatically. Then press
the Navigation / button to recommence seek search to
the next TV station, as shown in FIG.4 and FIG.5.
3. Press the MENU button to exit the manual.
FIG .1
TUNE
C SYSTEM PAL
S SYSTEM BG
PROGRAM 1
AUTO SEARCH
MANUAL SEARCH
/ :SELECT
/ ADJUST
FIG .3
TUNE
C SYSTEM PAL
S SYSTEM
BG
PROGRAM 1
AUTO SEARCH
MANUAL SEARCH
/ :SELECT
/ :ADJUST
FIG .4
MANUAL SEARCH
PROGRAM 1
BAND VHF L
FIG .5
TUNE
C SYSTEM PAL
S SYSTEM BG
PROGRAM 1
AUTO SEARCH
MANUAL SEARCH
/ :SELECT
/ :ADJUST
FIG .2
AUTO SEARCH
PROGRAM 1
BAND VHF L