Technicolor - Thomson 30L03B Flat Panel Television User Manual


 
2
10.Attachments—Do not use attachments not recommended by the manufacturer. Use of improper attachments
can result in accidents.
11.Accessories—When the product is used on a trolle
y
, care should be taken to avoid quick stops, excessive force,
and uneven surfaces that may cause the product and trolley to overturn, damaging equipment or causing possible
injur
y
to the operator. Do not place this product on an unstable trolle
y
, stand, pedestal, bracket, or table. The
product may fall, causing serious injury to a child or adult and serious damage to the product. The product should be
mounted according to the manufacturer’s instructions, and use onl
y
with a trolle
y
, stand, pedestal, bracket, or table
recommended by the manufacturer.
12.Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and
other dangerous conditions. Request a qualified service person to perform servicing.
13.Replacement parts—In case the product needs replacement parts, make sure that the service person uses
replacement parts specified by the manufacturer, or those with the same characteristics and performance as the
original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.
14.Power source—This product is intended to be supplied by a listed power supply, output rated :
~100 - 240 V, 50 – 60Hz, 1.8A maximum, indicated on the marking label. If
y
ou are not sure of the t
y
pe of power
suppl
y
to
y
our home, consult
y
our product dealer or local power compan
y
. For added protection for this product
during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the cable s
y
stem. This will prevent damage to the product due to lightning and power line
surges. When the unit has to be used with another power suppl
y
voltage, the power cable must be changed. Consult
y
our product dealer. The socket outlet should be installed near the equipment and easil
y
accessible. The power cord
attached conforms to the following power supply voltage. Use only the power cord designated b
y
our dealer to
ensure safet
y
and EMC. When connecting other products such as VCRs and personal computers,
y
ou should turn off
the power of the unit for protection against electric shock.
15.Overloading—Do not overload wall outlets, extension cords, or convenience receptacles on other equipment
as this can result in a risk of fire or electric shock.
16.Entering of objects and liquids—Never insert an object into the product through vents or openings. High
voltage flows in the product, and inserting an object can cause electric shock and/or short internal parts. For the
same reason, do not spill water or liquid on the product.
17.Damage requiring service—If any of the following conditions occurs, unplug the power cord from the AC
outlet, and request a qualified service person to perform repairs.
a. When the power cord or plug is damaged.
b. When a liquid is spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls
not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified
technician.
e. If the product has been dropped or the cabinet has been damaged in any way.
f. When the product displays an abnormal condition or exhibits a distinct change in performance. Any noticeable
abnormality in the product indicates that the product needs servicing.
18.Safety checks—Upon completion of service or repair work, request the service technician to perform safet
y
checks to ensure that the product is in proper operating condition.
19.Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
This is a safety feature.