Filter
Top Products
Press the red button
The following menu is displayed: LOUDSPEAKERS is selected.
If this is not the case, select the Contents line with the red
key and LOUDSPEAKERS with .
Select the SOUND line.
This varies depending on the sound type received:
SOUND MONO
SOUND STEREO or NICAM Stereo
SOUND DUAL (2 languages)
SOUND NICAM 3
SOUND AV
Select the required sound for the loudspeakers.
For normal operation, AUTO/STEREO position is
recommended. STEREO or MONO will be selected
automatically depending on the signal received.
Select the Effect line
The number and type of selections available varies
according to the configuration selected (see p. 15).
Depending on the selected configuration,you will be able to
choose betwen 2 or 3 of the following options :
Normal, Wide, Hall, Dolby.
Select the type of sound required.
According to which selection and configuration is chosen (see
page 15), you will obtain one of the sound effects shown on the
table on the next page.
When the type of sound received changes (mono to stereo or
vice versa), the sound effect automatically becomes that selected
for the type of sound received.
Press briefly to remove the menu.
television set
sound adjustments
16
Sound Auto/Stereo Mono
Effect Normal Wide
TV Treble
TV Bass
LOUDSPEAKERS HEADPHONES AV
LOUDSPEAKERS
Sound Auto Mono
Sound Sound 1 Sound 2
Sound Sound 1 Sound 2 Sound 3
Source Stereo Sound 1 Sound 2
Effect
Sound Auto/Stereo Mono
Sound Auto/Stereo Mono
Sound Auto/Stereo Mono
Effect
Normal Hall Dolby
Treble
Bass
TV treble
TV bass
LOUDSPEAKERS HEADPHONES AV
C11) 2 bis SON NIC DOL GB 3/06/96 15:10 Page 16