Filter
Top Products
7
ENGLISH
A correctly installed satellite antenna is essential for the receiver to operate.
The satellite antenna coaxial cable must be long enough to reach the desired receiver
site.
Install the receiver near your television set, making sure to leave ventilation space of about
15 cm to the sides and above the receiver. Do not obstruct the ventilation slots of the
receiver.
You can install the receiver according to the following example :
- Do not yet connect the set to the mains.
- Plug F must be correctly installed on the coaxial cable of the LNB. Remove the cable
sheath, fold back the braid (ensure that the central strand of the cable does not touch the
braid, to avoid a short circuit), and manually turn the plug to tighten it on the coaxial
cable.
INSTALLATION OF SATELLITE RECEIVER
TV DECODER
VCR
L
R
IF INPUT
MADE IN
GERMANY
Decoder
SCART
cable
TV
VCR
A
WARNING!
Shock Hazard
Do not open
230 V-
50 Hz
26 W max.
Satellite antenna
B
Ant.