Filter
Top Products
14
Basic functions
1. Open the disc tray by pressing the
OPEN / CLOSE key.
2. Insert a disc. The disc label must face
upwards (Audio CD, Video CD,
single-sided DVD
(1)
, etc.)
3. Close the disc tray by pressing the
OPEN / CLOSE key.
Disc playback starts as soon as the tray is closed (if programmed k page 16). If it doesn’t start
automatically, press PLAY.
• With a DVD, the disc menu appears. Press OK to start playback or select another option
(4)
, in the
disc menu using the Navigation keys. To validate your selection, press OK.
• With an audio CD or video CD, playback starts.
To access a specific CD track, DVD title or chapter, press the INFO key to display the Info banner
(k page 11) or press Pr +.
To stop playback momentarily
(2)
press STOP once. Press twice to stop it completely
(3)
.
Loading a disc
Playing a disc
Double-sided discs have a small label on both sides near the centre. With most DVDs, a
disc-specific menu appears. In that case, follow the instructions.
The player has memorised the last scene on the
disc. If you now press
PLAY
: playback starts
from this point. To erase
Resume memory
,
press
STOP
.
Your player records which was the last scene it
played in each of the last 5 DVDs.
Resume memory does not work with interactive
discs (without elapsed play time information).
If the player is left in STOP mode for more than
2 minutes without any user interaction, a screen
saver will be activated (fade in / fade out). After
about 30 minutes have elapsed in STOP mode
without user interaction, the player will be
automatically switched off.
Depending on the DVDs, it may be possible to
change the language during playback
(
k
page 23).
Loading a “single-sided” disc
1.
Press once or several times for higher speeds.
You can also use the player keys.
• In search mode, no sound is heard on DVDs.
In Play mode, start the Forward or Reverse fast motion playback
(1)
using the FWD or REV keys
(2)
.
Quick search of images or a track
1.
2.
2. 3.
4.
Navigation
keys
DTH210E_EN 22/03/02 10:48 Page 14