Filter
Top Products
13
Advanced functions
EN
PIP - PAP
This function can be used to display a second source (TV,AV, etc.) in a corner of the screen
or on the right side of the screen. It is available in both TV and PC mode.
Note: If this function is not available for the source displayed on the screen a message will inform
you of this.
Press the MENU button to display the OVERVIEW menu. In PC mode, select PIP and
press
OK.The PIP menu offers the following options:
Dual mode: use the buttons to select ann option from the list:
- Off: function is disabled, full screen in TV or PC mode.
- PIP:a channel or AV programme is displayed in a frame in a corner of the screen.
- PAP:the screen is divided vertically in two and the PIP is displayed on the right side.
The other menu options may or may not still be accessible, depending on the option you
have selected:
- In
PIP mode, you can select the programme, the zoom and the position of the frame
on the screen. Select an option from the list each time using the buttons.
- In PAP mode, you can select the programme to be displayed in the frame. Select an
option from the list each time using the buttons.
Press
EXIT to close the menu. Select the option Return and press OK to return to the
OVERVIEW menu.
Operation
Use the PIP button on the remote control to enable the different display modes in turn.In
TV mode, the sound always comes from the main programme. In PC mode, the sound
always comes from the VGA or HDMI AV source.
In both display modes:
- Press the
FREEZE button to freeze the picture of the main programme.
- To apply the PIP function to an AV programme in RGB, you need to select
RGB as
the relevant AV source in the
AV Settings menu (see page 17).
- If the channel or AV programme that you want to apply the PIP function to is locked
the pictures will not be displayed. Change channel or press OK.Then follow the
instructions on the screen.
In PIP mode:
- Use the
SWAP button to swap the channels around.
- Use the
PIP ZOOM button to change the size of the PIP picture.
- Use the buttons to change the position of the PIP frame on the screen.
- Use the
PIP+/PIP- buttons to change channels on the right side of the screen.
- In TV mode, press
OK to display the PIP picture on the full screen.
In
PAP mode:
- Use the
SWAP button or buttons to swap screens.
- Use the
PIP+/PIP- buttons to change channels on the right side of the screen.
- Use the
TEXT button (purple) to display on the right side of the screen Teletext on
the channel displayed on the left. Press
EXIT to disable this function.
Press
EXIT to quit PIP mode and return to full screen in TV or PC mode.
PIP
Return
Dual Mode
❿❿
PIP
Channel 04 BBC4...
Zoom Off
Position Upper right
IFC230_EN 3/01/06 11:19 Page 13