Filter
Top Products
- 5 -
This set is equipped with an automatic search system which will search and store all channels available in
your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily
newspaper.
Ensure that the aerial lead is connected to the television and any VCR or SAT equipment that is connected
via the antenna is turned on but do not switch on if also/only connected to a Scart/AV input.
If your VCR is connected by RF cable and not by SCART and if you do not find the VCR output through
Autoprogramming, then go to Manual Channel Setting.
AUTOMATIC CHANNEL SETTING
When the television set is turned on for the first time,
the Installation menu appears automatically.
If this menu is not displayed, you can make it
appear as follows :
- Switch the television to Stand-By.
- Switch off the television by pressing the on/off switch and wait for the light to go out.
- Switch the set back on, whilst keeping the PROG
—
button on the television keypad
pressed down until the INSTALLATION MENU appears.
Press briefly, a new menu appears, automatic
search begins.The cursor will move from left to right.
Please wait until the following
menu appears.
1. INSTALLATION MENU
English press
Deutsch
Français
Français (Belgique, Suisse)
Italiano
Español
INSTAL. MENU
+
AUTO-PROGRAMMING
Searching for stations
UK
Stations found : XX
CCXX
Press repeatedly the button to select the menu
language you require.
MENU
FUNC. VT
This menu is used for :
• allocating programme numbers and name the
programmes auto tune has found (ie. BBC 1 in
Prog. 1, etc…).
• storing the changes made in memory.
• erasing a programme.
2. PROGRAMME ORGANIZER MENU
To select a station PR
—
/ PR +
To give a prog. no. +
To erase this station
—
When completed : press
[ TV ]
PROGRAMME ORGANIZER
PR 01 CH22
To select a station PR
—
/ PR +
To give a prog. no. +
To erase this station
—
When completed : press
[ TV ]
PROGRAMME ORGANIZER
PR 01 CH22
Select the programme.
To erase :
keep pressed for some seconds until the station
disappears.
To store :
press briefly and a new menu will appear.
Select the number that you want to give
to the programme.
ERASING - STORING PROGRAMMES
Name :
—
—
—
—
To store and continue
PROGRAMME ORGANIZER
PR 01 CH22
Program No :
—
—
PROG.
STOP
FUNC. VT
FUNC. VTSTOP
M 3673 GC/GCT GB 8/10/1997 17:39 Page 5