Filter
Top Products
When the line begins with VL, VH or U go to
point 5.
3. When the line begins with CH or CC:
Make use of the directional keys Left/Right
to select either CH (aerial) or CC (cable).
4. Validate by pressing
ok
.
5. Press the directional key Left or Right to
start Channel Set-up in either descending or
ascending order.
When a channel is found, the pictures appear.
If the pictures are poor, make use of the
directional keys Up/Down to select the
line ->
.
<- and try to improve picture quality
with the directional keys Left/Right.
6. Then select PR-- with the Up/Down keys
and enter the number of the
programme/channel corresponding to the
pictures. This operation can also be perfor-
med with directional keys Left/Right.
7. Store the programme by pressing
ok
.
To find the next programme, re-start Channel
Set-up by means of the directional keys
Left/Right.
To leave the menu, press
exit
.
How to adjust the picture?
Press the key menu once to call up the
menu
window. With the directional keys Up/Down,
select the feature you want to adjust
(brightness, colour, contrast, sharpness, tint).
Now perform the adjustment by means of the
directional keys Left/Right.
Tint adjustment is possible for
NTSC-pictures only.
To close the menu window, press
exit
.
Settings are stored until you proceed to
another change.
How to modify the preferences?
1. Press the
menu
key once.
2. Adjust the picture as described above.
3. Store by pressing the red key.
Note: Settings performed as described above
supersede the “average adjustments” made
by the manufacturer.
How to restore the preferences?
With the red key.
How to adjust the volume?
With the key
volume +
or
-
. To switch the
sound on or off, press
mute
.
How to zap?
With key
pr+
or
pr-
.
How to display a channel number?
Press the key info to display or erase
the channel number, as well as the time
remaining until timer-programmed
switching-off.
If the channel has been fine tuned, the symbol
->
.
<- is also displayed.
How to program switching-off?
Press the Green key
, first, then, with the
directional keys Left/Right, set on the screen
the time remaining (in 10-minute increments
up to a maximum time of 4 hours) until
shutdown of the TV set.
To exit the menu, press
exit
.
To cancel, first press the Green key and
then, by means of the directional key Left,
reset the time remaining on -:--.
When the programmed remaining time is
over, the TV set will switch on standby.
Switching the TV set off by means of the
On/Off-button deactivates programmed
switching-off.
5
GB