Filter
Top Products
6
DVD-RAM FRONT PANEL
The photo below illustrates the following features of the SD-W2002 DVD-RAM’s
front panel:
Emergency Eject Hole: The emergency eject hole is to be used only when the DVD
tray will not open when the Load/Unload button is pressed. Insert solid bar (i.e.
paper clip) into hole, applying gentle presure, until tray opens. Do not use Emer-
gency Eject Procedure while the drive is in operation.
Loading Tray: Load disc using tray or recording cartridge
Load/Unload Button: Used to open the disc tray so you can install or remove a
disc or recording cartridge.
Busy Indiactor: Provides status of drive.
DVD-RAM BACK PANEL
The photo below illustrates the following features of the SD-W2002 DVD-RAMs
back panel:
Digital Audio Out Connector: Outputs Digital Audio on the DVD-RAM.
Analog Audio Out Connector: Outputs Analog Audio on the DVD-RAM.
ATAPI Connector: Connects DVD-RAM to computer.
Power Connector: Connects DVD-RAM to power source.
Mode Select Jumper: Selects if drive is to be Master, Slave or Cable Select.