Filter
Top Products
English - 8 -
Digital Tuning
Before switching on the television put your decoder and media recorder to Standby if they are connected and ensure the
aerial is connected to your television. To set up the television use the buttons on the remote control as detailed on
page 4.
Connect the mains plug and switch the TV into standby
using the top Power button. Press any numbered or
standby button on the remote control, the
Local Op-
tions
screen will appear. This screen will appear the
first time that the television is switched on and each
time the television is reset.
LOCAL OPTIONS
Select your Country by using or buttons. Use
to move down through the list.
Set your
Language and Audio Language out of the
options available.
You can also set
Subtitles OFF, as well as specifying
the subtitle language.
When completed, press
OK to start tuning.
After auto-tuning has completed, you may find the
time is not correct. In this case, you can adjust the
time by using
and buttons to highlight Local
Time Setting,
and and buttons to set the correct
time.
The Auto tuningscreen will appear and the television will
start to search for available stations.
The progress bar will move along the line.
DTV AUTO TUNING
You must allow the television to complete the search.
When the search is complete the Auto tuning screen will
display the total number of services found.
9
DTV AUTO TUNING
22
Use or to move through the list to select a
programme then press
OK to view.