Filter
Top Products
16
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
To lock channels:
1. Use the Channel Number buttons (0–9) to display the television
channel you wish to lock.
2. Press MENU, then press a or b to display the OPTION menu.
3. Press c or d to highlight LOCK.
4. Press a or b to display the LOCK menu.
5. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu
appears.
6. Press c or d to highlight CH LOCK
and press a or b to display the CH
LOCK menu.
7. Press a or b to select the following:
• SET– to set the channel as one to be
locked. Then press ENTER.
• CLEAR– to clear all channels from
the list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other
channels. When you are finished
locking channels, press EXIT to return
to normal viewing.
If you try to tune a locked channel, the
TV will not display it, but will display the
nearest unlocked channel.
Note:
After programming CH LOCK, change
channels before turning off the television.
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START
NEW PIN CODE
LOCK
OFF
OFF
VIDEO LOCK
PICTURE AUDIO SETUP
CH
OPTION
END EXIT
SET ENTER
TV CABLE
SELECT
CH LOCK : CH 12
000
000
000
LOCKED CH
SET/CLEAR SET CLEAR
Menu/
Enter
Exit
Channel
Numbers
c d a b
Using the TV’s
Features
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the LOCK menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
5. You may now enable blocking. See “Locking channels” (below),
“To change your PIN code” (below), “Locking video input” (page
17), or “Setting the GameTimer
TM
” (page 17) .
To change your PIN code:
1. Press MENU, then press a or b to display the OPTION menu.
2. Press c or d to highlight LOCK.
3. Press a or b to display the BLOCKING menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press c or d to highlight NEW PIN CODE and press a or b to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the
BLOCKING menu. The PIN code will be
released (BLOCKING RESET status
restored).
Menu/
Enter
Exit
Channel
Numbers
c d a b
Recall
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START
NEW PIN CODE
LOCK
OFF
OFF
VIDEO LOCK
J3S00221A(E)_P14-22 11/01/2005, 12:55 PM16