Filter
Top Products
14
Getting started
Manual Search - digital only -
If there were any missing channel after Full Search, these
channels might be found by using Manual Search described
in this section.
From the Setup menu, press V or U to select Manual
Search.
Press
, then press Y or Z to select the channel(0~69)
you wish to search.
DTV Menu...[Setup...Manual Search]
Language
Country/Region
Full Search
Channel Number
Signal Strength
21
0%
Quick Search
Channel List
Manual Search
Fav Group : 1
EXIT OK
MENU
Confirm Return Navigate Cancel
If scanning was successful, Signal Strength will
appear at almost 100%. Repeat to scan other channels as
necessary.
DTV Menu...[Setup...Manual Search]
Language
Country/Region
Full Search
Channel Number
Signal Strength
100%
Quick Search
Channel List
Manual Search
Fav Group : 1
EXIT OK
MENU
Confirm Return Navigate Cancel
21
If scanning was unsuccessful, Signal Strength will
appear at almost 0%.
At this point you can rescan the signal or refer to aligning
the direction of the antenna to get the signal. Refer to your
antenna installer if problem persists.
Notes:
Signal Strength refers to the input Radio Frequency
(RF) signal strength as perceived by the TV. Note that too
strong signal may cause erroneous readings. If you use an
antenna booster and find that you still get a low signal level,
your booster gain may be set too high. In this case, adjust
the gain accordingly. You may also see the No Signal on
the screen when the signal level is low.
1
2
3
4
•
Auto Tuning - analog only -
First, use the Auto Tuning function to preset all the active
channels in your area automatically. Then, arrange the preset
channels with the Manual Adjust function so that you can
tune into desired channels.
Press
, and Y or Z to select the Setup menu.
Press
and U or V to select Auto Tuning menu.
Press
, a confirmation screen will appear indicating
that This will do auto tuning , Are you sure?
ATV Menu...[Setup...Auto Tuning]
Language
Country/Region
Auto Tuning
Manual Adjust
Fav Group : 1
Channel List
Fav Group : 2
EXIT OK
MENU
Confirm Return Navigate Cancel
Auto Tuning Confirm
This will do auto tuning,
Are you sure?
Press to start the automatic search.
The search will begin for all available stations.
ATV Menu...[Setup...Auto Tuning]
Language
Country/Region
Auto Tuning
Manual Adjust
Fav Group : 1
Channel List
Fav Group : 2
EXIT OK
MENU
Confirm Return Navigate Cancel
ATV Channels: 0
VL
10%
The slide bar will move along line as the search
progresses.
If you make a mistake, simply repeat steps 1-3 to start
again from the beginning.
When the automatic search is completed, the TV will
automatically return to the first program position.
Press
or to view the programmed position.
Note:
When you preset the program channel which sound of
broadcast transmission system adopts “M” system, the sound
system may not be tuned correctly if the radio waves transmit
badly. At that time, preset the channel by Manual Search.
1
2
3
4
5
6