Filter
Top Products
40
Equipment
connections
Equipment connections
PC Setting
(continued)
• If the clock phase, which synchronize the PC signal and LCD display, is not optimized, the picture will blur.
This function enables you to adjust clock phase and display a clear picture.
• If the sampling clock does not synchronize with the dot clock frequency of the PC, blurred picture detail will occur,
or screen width will change, or drift patterns in vertical lines may be apparent.
This function enables you to adjust it and optimize the picture.
• The Reset function adjusts the PC Setting (for all VGA, SVGA and XGA) to the factory settings.
To adjust a PC setting (continued)
First press and hold the button until the video input mode list
appears on the screen, then press the
or and OK buttons in
order to select the PC input mode (see page 29).
To adjust the Clock phase of the picture:
Press the MENU button, then
press the
or button to
display the SET UP menu.
Press the
or button
to select PC Setting.
Press the OK button, then press
the
or button to select
Clock phase.
Press the or button to
obtain a clear picture.
To adjust the Sampling clock:
From the PC Setting menu,
press the
or button
to select Sampling clock.
Press the or button to
optimize the picture.
To reset the PC Setting:
From the PC Setting menu,
press the
or button to
select Reset on the 2nd page.
Press the OK button.
Language
SET UP
MENU
Back Watch TV
EXIT
English
PC Setting
OK
Vertical height
Vertical position
MENU
Back Watch TV
EXIT
0
0
0
Clock phase
Horizontal position
0
PC Setting
1/2
Horizontal width
0
0
Sampling clock
Clock phase 0
MENU
Back Watch TV
EXIT
Vertical height
Vertical position
0
0
0
Clock phase
Horizontal position
0
PC Setting
1/2
Horizontal width
0
Sampling clock
0
Sampling clock 0
DVD
MENU
P
P
21 3
54 6
87 9
VCR
TV
DVD
0
OK
CALL
MENU
EXIT
Note:
The optimum points of the clock phase
and sampling clock adjustments may be
incomprehensible according to the input
signals.
MENU
Back Watch TV
EXIT
PC Setting 2/2
0
Reset
OK