Toshiba 34AS41 Flat Panel Television User Manual


 
18
Set up
Preparation
Basic Operation
Advanced Operation
Reference Section
Watching TV programs or videotapes
TV/VIDEO
CHANNEL t/s
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0
ENT
100
POWER
o
REWPAUSE
FF
SOURCESTILL
PIP
SLOW
PIP CH LOCATE SWAP
STOP
PLAY
REC
TV/VCR
TV/VIDEOFAV CH
A
EXIT
Channel
Number
CHANNEL
s/t
TV/VIDEO
T/S
t/s
Selecting a TV channel
Select a channel in one of the following two ways:
Scan through the programmed channels in numerical sequence:
Press CHANNEL s to select the next higher channel.
Press CHANNEL t to select the next lower channel.
Continue pressing CHANNEL s or t to select the next programmed
channel.
Select a channel directly:
Press the Channel Number buttons (0–9 and 100).
For example:
To select channel 4, press 0—4.
To select channel 38, press 3—8.
To select channel 125, press 100—2—5.
If you cannot select a specific channel, make sure the TV/CABLE function is
set correctly (see page 16).
Selecting the video input source
You can use the TV/VIDEO button to view a signal coming from other video
equipment connected to your TV (such as a VCR or DVD player). See
“Connecting your TV” on page 5.
Note: To operate your video equipment properly, refer to the instructions
provided with the video equipment.
1 Turn the TV and video equipment on.
2 Press TV/VIDEO to select VIDEO 1 or
VIDEO 2. The selected source will be
displayed in purple.
TO SELECT PUSH TV/VIDEO
VIDEO1
VIDEO2
TV
EXIT
RECALL
MENU
3 Operate the video equipment normally.
About the DEMO (demonstration) mode
When the DEMO mode is activated, your TV automatically displays a variety
of its on-screen menus and special features. This function is provided for
demonstration purposes only.
To start the demo:
1 Press MENU until the Option menu is
displayed on-screen.
2 Press s or t until DEMO is displayed in
purple.
3 Press T or S to select START. The on-
screen demo starts after about 15 seconds.
To stop the demo:
1 Press EXIT or RECALL on the Remote, or select STOP in the menu.
LANGUAGE:[ENGLISH]FRANCAIS
DEMO:
C.CAPT:
ESPANOL
[START]STOP
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
MOVE[
t s
] SELECT[
T
S
]
MENU TV / VIDEO VOLUME CHANNEL
POWER
Basic Operation