39
Appendix
Using the TV’
s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
Displaying TV status information on-screen
Press RECALL to display the following information on-screen:
• Clock
• Channel number or VIDEO mode selected
• Channel label (if set)
• Stereo or SAP (second audio program) audio status
• On timer, Sleep timer (if set)
• Picture size
Recall
STEREO
SAP
ON TIMER 12:00AM
SLEEP TIMER 2h00m
ANT
FULL ABCD
CABLE
CLOCK 12:00AM
007
OFF
HDMI / DVI
AUDIO
BBE
HDMI
RESET
:SELECT :ADJUST
Selecting the HDMI audio input source
See page 14 for details on connecting an HDMI or a DVI device to the TV’s
HDMI input.
If you connect a DVI device, to hear audio you must also connect the analog
audio cables to the HDMI audio IN jacks (see page 14.) Set the HDMI audio
input setting to “DVI” with this connection.
If you connect an HDMI device and play media with digital audio output, to
hear digital audio, set the HDMI audio input setting to “HDMI” with this
connection.
If you connect an HDMI device but play media with analog audio output (for
example, certain CDVs do not output digital audio), to hear audio you must
also connect the analog audio cables to the HDMI audio IN jacks (see page
14.) Set the HDMI audio input setting to “DVI” with this connection.
To select the HDMI audio input source:
1. Press MENU, and then press or to display the AUDIO menu.
2. Press or to highlight HDMI.
3. Press or to select HDMI or DVI.
Menu
Turning off the built-in speakers
Use this feature to turn off the TV speakers when you connect an
audio system (see “Connecting an audio system” on page 15.)
To turn off the built-in speakers:
1. Press MENU, then press or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight SPEAKERS, and then press or to
select OFF.
To turn on the built-in speakers:
Select ON in step 2 above.
AUDIO
MTS
BASS
TREBLE
BALANCE
STABLE SOUND
SPEAKERS
STEREO
:SELECT :ADJUST
25
25
0
OFF
ON / OFF
Using the TV’
s
Features
3U00221A(E)_P37-Back 29/03/2005, 1:54 AM39