Toshiba 36A43 CRT Television User Manual


 
17
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
3. Press y or z to highlight TV/CABLE.
4. Press
x or to highlight TV (if you use an antenna) or CABLE
(if you use cable).
5. Press
z to highlight CH PROGRAM.
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
MORE
V-CHIP CONTROL
MORE
V-CHIP CONTROL
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
6. Press x or to start automatic channel programming
(CH PROGRAM displays on-screen). The TV automatically
cycles through every TV or cable channel (depending on which you
selected), and stores all active channels in the TVs memory.
7. When automatic channel programming is complete, the message
CH Programming Completed appears.
8. Press CHANNEL
▲▼ to view the programmed channels.
Adding and erasing channels manually
After you have automatically programmed the channels into the TVs
memory, you can manually add and erase individual channels.
To add or erase a channel in the TVs memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press
x or to highlight the SET UP menu.
4. Press
y or z to highlight ADD/ERASE.
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
MORE
V-CHIP CONTROL
5. Press x or to highlight ADD or ERASE, whichever function you
want to perform.
6. Press MENU.
7. Repeat steps 16 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL
yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (09 and 100).
Note: For channels 100 and higher, press the 100 button, and then the next
two channel numbers (for example, to select channel 100, press 100-0-0;
to select channel 125, press 100-2-5).
Channel yz
Channel
Numbers
}
EXIT
}
stT S
MENU