Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
24
Labeling channels
You can choose any four characters to identify a channel. Channel
labels appear above the on-screen channel number display each time
you turn on the TV, change the channel, or press RECALL. You can
assign labels to a maximum of 32 channels.
To create a channel label:
1. Tune the TV to the channel you want to label.
Note: The TV must be in “CABLE” mode to label a cable channel
and in “TV mode” to label an antenna channel. Select TV/CABLE in
the SET UP menu.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight CH LABEL, and then press • to open
the CH LABEL menu.
4. Press x or • to highlight SET.
MOVE
[
]
[
]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
SET UP
START
MOVE
[
]
[
]
CH LABEL
SET/CLEAR [SET] CLEAR
LABEL – – – –
SET UP MENU
SET UP
SELECT
5. Press z to highlight LABEL.
6. Repeatedly press x or • to select a character for the first space,
and then press MENU. Repeat this step for all four characters.
MOVE
[
]
[
]
CH LABEL
SET/CLEAR [SET] CLEAR
LABEL E F G –
L
SET UP MENU
SET UP
SELECT
SET [ENT]
7. Repeat steps 1–6 for other channels you want to label.
To erase a channel label:
1. Tune the TV to the channel whose label you want to erase.
Note: You must be in CABLE mode to erase a cable channel label
and in TV mode to erase an antenna channel label. Select
TV/CABLE in the SET UP menu.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight CH LABEL, and then press • to open
the CH LABEL menu.
4. Press x or • to highlight CLEAR, and then press z.
MOVE
[
]
[
]
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
TIMER: 0 MIN
MORE
SET UP
START
MOVE
[
]
[
]
CH LABEL
SET/CLEAR SET [CLEAR]
LABEL – – – –
SET UP MENU
SET UP
SELECT
5. Press EXIT.
6. Repeat steps 1–5 to erase other channel labels.
Channel
Numbers
yzx •
MENU
Note:
For a blank space in the label name,
choose a blank space from the list of
characters.
You must assign a character to all four
spaces in the label or the label will not
be assigned.