Filter
Top Products
106
Picture and Sound Controls
NOTE
❖
You can typically leave the TV in Stereo mode because it outputs the
type of sound being broadcast (stereo or monaural).
❖
If the sound is noisy, select Mono.
❖
If there is no sound in SAP mode, select Stereo.
Adjusting the audio balance
You can adjust the audio balance.
1 Press the SETUP button.
2 Select Sound > Balance and press the OK button.
3 Press the
t
/
u
(arrow) buttons to adjust the balance.
4 Press the EXIT button.
Adjusting the range
You can adjust bass and treble.
1 Press the SETUP button.
2 Select Sound > Bass or Treble.
3 Press the OK button.
4 Press the
t
/
u
(arrow) buttons to adjust the range.
5 Press the EXIT button.
TV Speakers On/Off
This feature allows you to turn the TV speakers off when connecting the
audio system.
1 Press the SETUP button.
2 Select Sound > TV Speakers and press the OK button.
3 Press the
p
/
q
(arrow) buttons to select On or Off.
To turn on the built-in speakers:
1 Choose On in step 3 above.
Setting the Primary Audio Language
You can set the Primary Audio Language of the digital broadcast.
1 Press the SETUP button.
2 Select Sound > Primary Audio Language and press the OK
button.
3 Press the
p
/
q
(arrow) buttons to select English, Français, or
Español.
4 Press the EXIT button.
Adjusting the audio