Filter
Top Products
7
7) VESAMounting Pattern
TVSize HolePattern(HxV) ScrewSize
32" 200mm x 200mm M6
40" 2OOmmx 2OOmm M6
50" 4OOmmx 2OOmm M8
Removing the Pedestal Stand
1) Carefully lay the front of the unitface down ona fiat,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2) Remove the stand screws shown in the diagram
below. Thiswill allow removal of the pedestal stand.
3) Once you have removed the screws holding the
pedestal stand in place, remove the pedestal stand
from the TV.
32" TV. VESAMountingPattern
Two stand screws Hook for attaching
thestrap
(asshort as possible
(SampleIllustration)
40"TV.
VESAMounting Pattern
I • Hookfor attaching
Four stand screws the strap
(as short as possible)
(SampleIllustration)
50"TV.
VESAMounting Pattern
Four stand screws
the strap
(as short as possible)
(SampleIllustration)
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy strap
from the hook(s) on the rear of the TV to a wall stud,
)illar, or other immovable structure. Make sure the
strap is tight, secure, and parallel to the floor.