Filter
Top Products
31
English
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
8
Appendix
Troubleshooting
(continued)
OSD messages
1.AUTO SCAN REQUIRED
Need to search TV channel message.
2.MTS
Display TV audio system message.
3.CLOSED CAPTION
Display CC system message.
4.NO SIGNAL
Display the main picture no signal input message.
5.SLEEP TIMER
Display sleep timer message.
6.SLEEP TIMER COUNTER
Display sleep timer counter message.
7.NO FUNCTION
If you press the remote control keys for the "Audio",
"VGA", "AV mode", "Zoom", "PIP View", "FAV1", "FAV2",
this message will be displayed "NO FUNCTION". These
functions are not available on this TV.
LED indications
Normal Operation
State Power LED Lamp LED Status Description
AC off Not lit Not lit AC power not connected
DC off when Quick
Restart
TM
seature is set
to Yes
Flashing orange Not lit 1. Low Power Shutdown (LPS) mode.
2. After several minutes, the TV will turn off all power
and go to standby model.
DC off when Quick
Restart
TM
seature is set
to No
Orange Flashing Lamp cooling several seconds.
Standby mode Orange Not lit AC plug in, DC power off.
Warm-up Green Flashing Lamp ignition.
Operation mode Green Not lit Display is active.
Attempting to light
lamp unit
Green blinking Flashing
,IWKHODPSXQLWGRHVQRWOLJKWWKH79ZLOOWU\WROLJKWLWDJDLQ
WKLVSURFHVVZLOOUHSHDWXSWR¿YHWLPHV,ILWLVXQVXFFHVVIXO
DIWHUWKH¿IWKWU\DQHUURUPHVVDJHZLOODSSHDURQVFUHHQ
Error Codes
State Power LED Lamp LED Status Description
Error1:
2 Green, 1 Orange
LEDG: Flash
LEDO: Flash
Hi (OFF) Any FAN (1 or 2 or 3) failure or disconnected.
After the fan detects error 5 sec, the LED shows
"ERROR1" message.
Error2:
3 Green, 2 Orange
LEDG: Flash
LEDO: Flash
Flash Lamp ignition failure, Lamp failure, blaster error, Lamp
shut off unexpectedly.
(The system will shut down main power go to standy
mode.)
Error3:
5 Green, 2 Orange
LEDG: Flash
LEDO: Flash
Hi (OFF) DLP hardware error.
There are two status LEDs on the front of your
Micro Chip Display Projection DLP TV.
You can see the table below which display's the
LED status and their meanings.
LAMP
LAMP
LED
POWER
LED