Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
10
Connecting an A/V receiver
If you use a system that delivers Dolby Pro Logic* surround sound,
you will probably want to use the TV speakers as center channel
speakers.
A center channel speaker adds to the realism of a surround sound
system such as Dolby Pro Logic.
You will need:
• one pair of audio cables
• one video cable
• one audio cable for audio center channel
ANT
(
75
)
ANT-1
CHANNEL IN
ON OFF
OUT
RL
OUT
VIDEO
VAR
AUDIO
L/
MONO
IN
DVD IN
L
R
CR
CB
Y
L/
MONO
AUDIO
R
S-VIDEO
VIDEO
OUT
ANT-2
AUDIO CENTER
VIDEO 1 VIDEO 2
COLOR
STREAM
INPUT
AUDIO
R
AUDIO
ON OFF
Connection example of Dolby Pro Logic surround system
T V
Caution:
Make sure the TV is turned off before
connecting or disconnecting an audio cable to
the Audio Center Channel IN jack to avoid
damaging the speaker.
Note:
Refer to the instructions furnished with the
connected A/V receiver for detailed surround
system.
When the Audio Center Channel ON/OFF
switch is in the ON position, the TV speakers
will function only as the center channel
speakers.
Adjust the volume for center channel
speakers with the center level control on the
A/V receiver.
If you use the TV speakers as normal
speakers, set the Audio Center Channel
ON/OFF switch to the OFF position.
*
“Dolby Pro Logic” is a registered trademark
of Dolby Laboratories Licensing
Corporation.
To A/V receiver
Video
out
TV
in
Center
out
From
Antenna
VCR
Audio
Video Audio
Video
LDP/DVD
A/V receiver
Left
speaker
Right
speaker
Surround
speaker L
Surround
speaker L
Audio
Video
Audio
center
channel