Filter
Top Products
50
LX177 (E/F) Web 213:276
Chapter 5: Setting up your TV
6 Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
To cancel the reset:
Highlight No and press T.
Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
• Power-Saving mode keeps power consumption in standby
mode to below 3W. As a result, it takes a bit longer for the
TV to turn on.
• Fast mode increases power consumption in standby mode.
As a result, the TV will turn on more quickly. While in Fast
mode, the yellow LED on the front of the TV will be lit.
To set the Power-On Mode feature:
1 Press Y, and open the Setup menu.
2 Highlight Power-On Mode and press c.
3 Press B or b to select either Power-Saving or Fast.
Selecting the Demo Mode
You can select the TV’s demo mode on or off.
This feature is provided for demonstrational purposes only.
To select the Demo Mode:
1 Press Y, and open the Setup menu.
2 Highlight Demo Mode and press c.
3 Press B or b to select either On or Off.
Note: If the demo mode has been set to On, the Demo mode
will run automatically when you turn on the TV.
System Information
Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.
YesNo
Setup
CE-Link Setup
Sleep Timer
HDMI Settings
PC Settings
Slide Show Interval
Demo Mode On
Installation
Power-Saving
Power-On Mode
Power-Saving
2 Sec
Fast
Setup
CE-Link Setup
Sleep Timer
HDMI Settings
PC Settings
Slide Show Interval
Demo Mode On
Installation
On
Off
Power-On Mode
Power-Saving
2 Sec
42LX177_EN.book Page 50 Tuesday, May 15, 2007 1:58 PM