Filter
Top Products
Chapter 3: Using the remote control
26
Using the remote control to
control your other devices
If you have a non-Toshiba device or a Toshiba device that
the remote control is not preprogrammed to operate, you
must first program the remote control to recognize the
device (if you have not already done so) ( pages 28–30).
To use your TV remote control to operate a:
•
Cable converter box or satellite receiver, set the
MODE SELECT switch to CABLE/SAT.
•
DVD player or HTIB, set the MODE SELECT
switch to DVD.
•
VCR, set the MODE SELECT switch to AUX.
Note: Even after the TV remote control is
programmed, it may not operate certain
features on any other devices. If this happens
and you wish to use those features, you will
need to use the device’s original remote control.
16
17
11
19
18
2
3
12
14
15
10
21
22
20
13
8
9
1
5
4
7
6
A
Point the remote control
directly at the device.
1無
POWER
Turns the selected device on and off.
2無
Channel Numbers (0-9)
Press to directly access
channels (as opposed to
).
3無
+10
Press to directly access DVD chapters higher than
10.
4無
TOP MENU
Accesses a DVD’s top menu.
5無
CH
pq
For channels programmed into the channel
memory (
pages 34-35):
p
selects the next higher channel.
q
selects the next lower channel.
6無
DVD RTN
Returns to previous DVD’s menu.
7無
INFO
Displays TV status information on-screen.
8無
pqtu
Press to navigate DVD menus (may not work
on some DVD players).
9無
OK
Required by some satellite receivers and DVD
players to activate certain functions.
10無
EXIT
Closes on-screen menus.
DVD CLEAR
Press to reset the title and chapter number.
11無
PLAY
Begins playback of a tape or DVD.
12無
PAUSE
Press during play or record mode to pause the
picture; press again to restart.
13無
STOP
Stops the tape or DVD.
14無
SKIP
Skips forward to locate later DVD chapters.
15無
FF
Fast-forwards the tape or DVD. (Press during play
mode to view the picture moving rapidly forward.)
16無
SKIP
Skips back to beginning of current DVD
chapter, or locates previous chapters.
17無
REW
Rewinds/reverses the tape or DVD. (Press
during play mode to view the picture moving rapidly
backward.)
18無
MENU
Accesses the menu in CABLE/SAT mode.
DVD MENU
Accesses the DVD menu in DVD mode.
19無
GUIDE
Displays the channel guide in CABLE/SAT
mode.
SET UP
Accesses a DVD’s setup menu in AUX mode.
20無
SUBTITLE
Accesses subtitles if available.
21無
AUDIO
Accesses the Audio menu.
22無
MODE SELECT
Switches set to “TV” to control the TV;
“CABLE/SAT” to control a cable converter box or
satellite receiver; “DVD” to control a DVD player,
HTIB or BD; “AUX” to control a VCR.