Filter
Top Products
ENGLISH
29
MAGIC REMOTE CONTROL FUNCTIONS
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
Registering Magic Remote Control
The Magic Remote Control operates by pairing with your
TV.
Please register the remote as follows.
How to register the Magic Remote Control
(Wheel)
To register automatically, turn the TV
on and press the
Wheel (OK)
. When
registration is completed, the completion
message appears on the screen.
If registration fails, turn the TV off and
back on, then press the
Wheel (OK)
to
complete registration.
How to Re-register the Magic Remote Control
BACK
HOME
1 Press and hold the
BACK
and
SMART
buttons together for 5
seconds to reset, then register it by
following “How to register the Magic
remote control” above.
2 To re-register the Magic remote control,
press and hold the
BACK
button for 5
seconds toward the TV.
How to use Magic Remote Control
1 You can move the pointer by aiming the
Pointer Receiver of the remote control
at your TV then move it left, right, up or
down.
»
If the pointer does not work properly
leave the remote control for 10 seconds
then use it again.
2 If the pointer disappears, move the
remote control slightly to left or right.
Then, it will automatically appear on the
screen.
»
If the pointer has not been used for a
certain period of time, it will disappear.
i
1
3
2
1
If you press
Wheel (OK)
on the Magic
remote control, the screen appears.
Shows information about the current program
and screen.
2
Pressing this button will display number
keypad which you can select channel number.
3
You can select My Apps Menu.
Precautions to Take when Using
the Magic Remote Control
y
Use the Magic remote control within the maximum
communication distance (10 m, 32.8ft). Using the
remote control beyond this distance, or with an object
obstructing it, may cause a communication failure.
y
A communication failure may occur due to nearby
devices. Electrical devices such as a microwave oven
or wireless LAN product may cause interference, as
these use the same bandwidth (2.4 GHz) as the Magic
remote control.
y
The Magic remote control may be damaged or may
malfunction if it is dropped or receives a heavy impact.
y
Take care not to bump into nearby furniture or other
people when using the Magic remote control.
y
Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
y
It is recommended that an Access Point (AP) be
located more than 1 m (3.28 ft) away from the TV. If
the AP is installed closer than 1 m (3.28 ft), the Magic
remote control may not perform as expected due to
frequency interference.