Filter
Top Products
(E) 51/57/65HX93
Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.
78
Chapter 8: Using the TV’s features
________
SRS, WOW and the symbol are trademarks of SRS Labs, Inc.
SRS WOW technology is incorporated under license from SRS Labs, Inc.
Using the SRS WOW™ surround sound
feature
WOW is a special combination of SRS Labs audio technologies
(SRS 3D, FOCUS, and TruBass) that creates a thrilling
surround sound experience with deep, rich bass from stereo
sound sources. Your TV’s audio will sound fuller, richer, and
wider.
To adjust the WOW settings:
1. Put the TV in STEREO mode (see “Selecting stereo/SAP
broadcasts” on page 76).
2. Press MENU and open the AUDIO menu.
3. Highlight ADVANCED AUDIO SETTINGS and press
ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Advanced Audio Settings
SRS WOW: 3D
SRS WOW: Focus
SRS WOW TruBass
Save Done Reset
Dolby Virtual
SRS TruSurround
Off
Off
High
Off
4. Press z or y to highlight the WOW feature you want to
adjust, and then press x or • to adjust the item.
• 3D — To turn the surround sound effect on or off.
Note: If the broadcast is monaural, the 3D effect does not
work.
• Focus — To turn the vocal emphasis effect on or off.
• Tr u B ass — To select the desired bass expansion level
(HIGH, LOW, or OFF).
5. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
Resetting the advanced audio settings
To reset the Advanced Audio settings to their default values:
1. Highlight RESET in the Advanced Audio Settings menu
and press ENTER.
2. Highlight SAVE and press ENTER.
Advanced Audio Settings
SRS WOW: 3D
SRS WOW: Focus
SRS WOW TruBass
Save Done Reset
Dolby Virtual
SRS TruSurround
Off
Off
Off
Off
Adjusting the audio (continued)
Using the Dolby Virtual SRS
TruSurround sound feature
The Dolby
®
Virtual SRS TruSurround sound feature allows you
to enjoy virtual surround sound from the TV’s speakers.
• For digital input sources (digital antenna/cable or IEEE-1394)
encoded with
5.1-channel sound, the Dolby Virtual
SRS TruSurround feature functions as (VDD).
VDD simulates Dolby Digital 5.1-channel, six-speaker
surround sound from the TV’s speakers.
• For stereo analog input sources or sources with less than
4-channel coding, the Dolby Virtual SRS TruSurround
feature functions as Virtual Dolby Surround (VDS). VDS
simulates Dolby Surround sound from the TV’s speakers.
To turn on Dolby Virtual SRS TruSurround:
1. Press MENU and open the AUDIO menu.
2. Highlight ADVANCED AUDIO SETTINGS and press
ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
Advanced Audio Settings
SRS WOW: 3D
SRS WOW: Focus
SRS WOW TruBass
Save Done Reset
Off
Off
Off
Dolby Virtual
SRS TruSurround
On
3. Press z to highlight DOLBY VIRTUAL SRS
TRU SURROUND, and then press • to select ON.
4. To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highlight SAVE and press ENTER.
To turn off Dolby Virtual SRS TruSurround:
Select OFF in step 3 above.
Note: The Dolby Virtual SRS TruSurround and SRS WOW 3D features
cannot be on at the same time. If you set one to ON, the other will
automatically be set to OFF.